3906-16-9Relevant articles and documents
Direct reductive amination of ketones with ammonium salt catalysed by Cp*Ir(iii) complexes bearing an amidato ligand
Dai, Zengjin,Pan, Ying-Min,Wang, Shou-Guo,Yin, Qin,Zhang, Xumu
supporting information, p. 8934 - 8939 (2021/11/04)
A series of half-sandwich Ir(iii) complexes1-6bearing an amidato bidentate ligand were conveniently synthesized and applied to the catalytic Leuckart-Wallach reaction to produce racemic α-chiral primary amines. With 0.1 mol% of complex1, a broad range of ketones, including aryl ketones, dialkyl ketones, cyclic ketones, α-keto acids, α-keto esters and diketones, could be transformed to their corresponding primary amines with moderate to excellent yields (40%-95%). Asymmetric transformation was also attempted with chiral Ir complexes3-6, and 16% ee of the desired primary amine was obtained. Despite the unsatisfactory enantio-control achieved so far, the current exploration might stimulate more efforts towards the discovery of better chiral catalysts for this challenging but important transformation.
Iterative Alanine Scanning Mutagenesis Confers Aromatic Ketone Specificity and Activity of L-Amine Dehydrogenases
Mu, Xiaoqing,Wu, Tao,Mao, Yong,Zhao, Yilei,Xu, Yan,Nie, Yao
, p. 5243 - 5253 (2021/11/16)
Direct reductive amination of prochiral ketones catalyzed by amine dehydrogenases is attractive in the synthesis of active pharmaceutical ingredients. Here, we report the protein engineering of L-Bacillus cereus amine dehydrogenase to allow reactivity on synthetically useful aromatic ketone substrates using an iterative, multiple-site alanine scanning mutagenesis approach. Mutagenesis libraries based on molecular docking, iterative alanine scanning, and double-proximity filter approach significantly expand the scope of active pharmaceutical ingredients relevant building blocks. The eventual quintuple mutant (A115G/T136A/L42A/V296A/V293A) showed reactivity toward aromatic ketones 12 a (5-phenyl-pentan-2-one) and 13 a (6-phenyl-hexan-2-one), which have not been reported to serve as targets of reductive amination by currently available amine dehydrogenases. Docking simulation and tunnel analysis provided valuable insights into the source of the acquired specificity and activity.
Air Stable Iridium Catalysts for Direct Reductive Amination of Ketones
Polishchuk, Iuliia,Sklyaruk, Jan,Lebedev, Yury,Rueping, Magnus
supporting information, p. 5919 - 5922 (2021/03/08)
Half-sandwich iridium complexes bearing bidentate urea-phosphorus ligands were found to catalyze the direct reductive amination of aromatic and aliphatic ketones under mild conditions at 0.5 mol % loading with high selectivity towards primary amines. One of the complexes was found to be active in both the Leuckart–Wallach (NH4CO2H) type reaction as well as in the hydrogenative (H2/NH4AcO) reductive amination. The protocol with ammonium formate does not require an inert atmosphere, dry solvents, as well as additives and in contrast to previous reports takes place in hexafluoroisopropanol (HFIP) instead of methanol. Applying NH4CO2D or D2 resulted in a high degree of deuterium incorporation into the primary amine α-position.
Enzymatic Primary Amination of Benzylic and Allylic C(sp3)-H Bonds
Jia, Zhi-Jun,Gao, Shilong,Arnold, Frances H.
supporting information, p. 10279 - 10283 (2020/07/27)
Aliphatic primary amines are prevalent in natural products, pharmaceuticals, and functional materials. While a plethora of processes are reported for their synthesis, methods that directly install a free amine group into C(sp3)-H bonds remain unprecedented. Here, we report a set of new-to-nature enzymes that catalyze the direct primary amination of C(sp3)-H bonds with excellent chemo-, regio-, and enantioselectivity, using a readily available hydroxylamine derivative as the nitrogen source. Directed evolution of genetically encoded cytochrome P411 enzymes (P450s whose Cys axial ligand to the heme iron has been replaced with Ser) generated variants that selectively functionalize benzylic and allylic C-H bonds, affording a broad scope of enantioenriched primary amines. This biocatalytic process is efficient and selective (up to 3930 TTN and 96percent ee), and can be performed on preparative scale.
HETEROCYCLIC COMPOUNDS AS MUTANT IDH INHIBITORS
-
Paragraph 0265-0266, (2020/07/16)
The present disclosure relates generally to compounds useful in treatment of conditions associated with mutant isocitrate dehydrogenase (mt-IDH), particularly mutant IDH1 enzymes. Specifically, the present invention discloses compound of formula (IA), which exhibits inhibitory activity against mutant IDH1 enzymes. Method of treating conditions associated with excessive activity of mutant IDH1 enzymes with such compound is disclosed. Uses thereof, pharmaceutical composition, and kits are also disclosed.
Rh(III)-catalyzed synthesis of isoquinolines using the N-Cl bond of N-chloroimines as an internal oxidant
Chu, Benfa,Fang, Lili,Guo, Shan,Qi, Bing,Shi, Pengfei,Wang, Qi,Zhu, Jin
supporting information, (2020/03/10)
The Rh(III)-catalyzed coupling of N-chloroimines with alkynes for the efficient synthesis of isoquinolines is reported. This represents the first use of the N-Cl bond of N-chloroimines as an internal oxidant for construction of the isoquinoline skeleton. The synthesis features atom and step economy, a green solvent (EtOH), mild reaction conditions, and a broad substrate scope.
The Synthesis of Primary Amines through Reductive Amination Employing an Iron Catalyst
B?umler, Christoph,Bauer, Christof,Kempe, Rhett
, p. 3110 - 3114 (2020/06/01)
The reductive amination of ketones and aldehydes by ammonia is a highly attractive method for the synthesis of primary amines. The use of catalysts, especially reusable catalysts, based on earth-abundant metals is similarly appealing. Here, the iron-catalyzed synthesis of primary amines through reductive amination was realized. A broad scope and a very good tolerance of functional groups were observed. Ketones, including purely aliphatic ones, aryl–alkyl, dialkyl, and heterocyclic, as well as aldehydes could be converted smoothly into their corresponding primary amines. In addition, the amination of pharmaceuticals, bioactive compounds, and natural products was demonstrated. Many functional groups, such as hydroxy, methoxy, dioxol, sulfonyl, and boronate ester substituents, were tolerated. The catalyst is easy to handle, selective, and reusable and ammonia dissolved in water could be employed as the nitrogen source. The key is the use of a specific Fe complex for the catalyst synthesis and an N-doped SiC material as catalyst support.
Facile synthesis of controllable graphene-co-shelled reusable Ni/NiO nanoparticles and their application in the synthesis of amines under mild conditions
Cui, Zhibing,Liu, Jianguo,Liu, Qiying,Ma, Longlong,Singh, Thishana,Wang, Chenguang,Wang, Nan,Zhu, Yuting
supporting information, p. 7387 - 7397 (2020/11/19)
The primary objective of many researchers in chemical synthesis is the development of recyclable and easily accessible catalysts. These catalysts should preferably be made from Earth-abundant metals and have the ability to be utilised in the synthesis of pharmaceutically important compounds. Amines are classified as privileged compounds, and are used extensively in the fine and bulk chemical industries, as well as in pharmaceutical and materials research. In many laboratories and in industry, transition metal catalysed reductive amination of carbonyl compounds is performed using predominantly ammonia and H2. However, these reactions usually require precious metal-based catalysts or RANEY nickel, and require harsh reaction conditions and yield low selectivity for the desired products. Herein, we describe a simple and environmentally friendly method for the preparation of thin graphene spheres that encapsulate uniform Ni/NiO nanoalloy catalysts (Ni/NiO?C) using nickel citrate as the precursor. The resulting catalysts are stable and reusable and were successfully used for the synthesis of primary, secondary, tertiary, and N-methylamines (more than 62 examples). The reaction couples easily accessible carbonyl compounds (aldehydes and ketones) with ammonia, amines, and H2 under very mild industrially viable and scalable conditions (80 °C and 1 MPa H2 pressure, 4 h), offering cost-effective access to numerous functionalized, structurally diverse linear and branched benzylic, heterocyclic, and aliphatic amines including drugs and steroid derivatives. We have also demonstrated the scale-up of the heterogeneous amination protocol to gram-scale synthesis. Furthermore, the catalyst can be immobilized on a magnetic stirring bar and be conveniently recycled up to five times without any significant loss of catalytic activity and selectivity for the product.
Method for synthesizing chiral amine compound
-
Paragraph 0064; 0071-0073; 0123-0125, (2019/10/01)
The present invention provides a method for synthesizing a chiral amine compound. The method comprises the following steps: (1) reacting a compound of formula I with t-butylsulfonamide in the presenceof a catalyst to obtain a compound having a structure represented by formula II; 2) reacting the compound of the formula II in a hydrogen atmosphere in the presence of an iridium catalyst and a ligand to obtain a compound of formula III; and (3) carrying out a t-butylsulfonyl group removal reaction on the compound of the formula III to obtain the chiral amine compound. The method constructs the structure of sulfonamide by a keto carbonylgroup, and synthesizes the chiral amine compound with the aralkylamine structure by an asymmetric catalytic hydrogenation reaction of the sulfonamide structure, the ee value is generally 80% or above, the highest ee value is 99% or above, the yield of each step reaction can reach 90% or above, and the total yield is high.
Reductive amination of ketonic compounds catalyzed by Cp*Ir(III) complexes bearing a picolinamidato ligand
Tanaka, Kouichi,Miki, Takashi,Murata, Kunihiko,Yamaguchi, Ayumi,Kayaki, Yoshihito,Kuwata, Shigeki,Ikariya, Takao,Watanabe, Masahito
, p. 10962 - 10977 (2019/09/03)
Cp*Ir complexes bearing a 2-picolinamide moiety serve as effective catalysts for the direct reductive amination of ketonic compounds to give primary amines under transfer hydrogenation conditions using ammonium formate as both the nitrogen and hydrogen source. The clean and operationally simple transformation proceeds with a substrate to catalyst molar ratio (S/C) of up to 20,000 at relatively low temperature and exhibits excellent chemoselectivity toward primary amines.
