| 配方類型： |
MISCELLANEOUS |
| 配方說明： |
Ceramic Refractory |
| 配方組成： |
|
| 配制方法： |
In this typical formulation the gelation agent is a 0.6% ammonia solution. This formulation should be used if the desired working time ranges between 1/2 to 10 minutes.
1. Prepare the aggregate, with the desired particle distribution to achieve the necessary physical characteristics. Mix thr particles thoroughly so as to achieve maximum particle distribution.
2. Measure a given volume of "SILBONE" binder; this volume will be determined by your individual needs. Generally, a 1 to 10 ratio of binder to refractory by weight should be sufficient.
3. Prepare an ammonia solution by diluting 1-3 volume of 30% ammonia with 50 volumes of water.
4. Add to the binder between 4-10% by volume of the prepared ammonia solution. The gel time is controlled by the amount of ammonia solution added to the binder. for example, if 4% by volume of ammonia solution is added, the gel time should be about 10 minutes. If 10% by volume is added, the gel time should be about 1/2 minute.
5. Add the refractory mixt |
|
