| 配方類型： |
TEXTILES AND THEIR TREATMENT |
| 配方說明： |
Reparing Streaky or Unlevel Dyeings |
| 配方組成： |
|
| 配制方法： |
This leveling procedure can often correct unlevel dyeings without the need for stripping and subsequent redyeing.
Set bath at 120F with 0.5% owg "Tanaterge" D-6, 3% owg "Migrassist" AC/3% owg "Tanapal" CAL (or 6% "Migrassist" AC) and 20% Glaubers salt.
Add acetic acid to pH 4.0. Heat to the boil and hold for 2 hours. Where pressure equipment is available, more rapid and more complete leveling may be obtained at 225F. If dye additions are required, they should be made at 170F. Circulate 10 minutes, then return to top temperature at 2F per minute. Run 30 minutes at top temperature after each dye add.
When on shade, cool to 150F at 3F per minute. Give running warm water rinse until the bath is clear, then offload. |
|
